Skip to content
CV Rocket
Get started
How it worksThe enginePricingBlogContactSign in

Open nowPosted yesterday

Mechanical Forming Equipment Technician

CAMACO LLC62 open roles

Where
Lorain, Ohio
Get the CV for this job

From $25 per CV, paid once. No subscription.

Your applicationOpen nowMechanical Forming Equipment TechnicianCAMACO LLC · Lorain, Ohio

  1. YouYes, apply to this one.

  2. CV RocketCV written for this posting.

  3. 25 readersRecruiter, hiring manager, skeptic. Round after round.

  4. CV RocketApplied on CAMACO LLC's own form.

The reply lands in your private mailbox

3×more interviews than doing it yourself with ChatGPT.

The clock on this job

Early applications get read.

12.7% of postings close within 7 days. Measured by our own scanner across the market. CAMACO LLC postings stay open a median of 7 days.

Share of postings closed within
  1. 2.2%1 day
  2. 4.5%3 days
  3. 12.7%7 days
  4. 20.4%14 days
  5. 35.6%30 days
  6. 58.7%60 days
This job: posted yesterday

CAMACO LLC median: 7 days open

The posting

Purpose

To provide advanced mechanical technical support for four-slide, multi-slide, CNC wire-bending, and wire-forming equipment. The technician maintains machine safety, reliability, tooling condition, alignment, timing, setup repeatability, and production readiness through preventive maintenance, mechanical troubleshooting, repair, controlled adjustment, and accurate documentation

Assigned Equipment

• Baird 2

• Baird 324-1

• Baird 324-2

• Baird 4

• Baird 430

• Baird 35-2

• Baird 35-3

• Baird 35-4

• CNC Wire Bend

• Huron 12S

• Huron 8S

• Huron 8S (2)

• Wafios-P

• Wafios-S

• OMCG1

• OMCG2

• Other four-slide, multi-slide, and forming equipment as assigned

Essential Duties and Responsibilities

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

· Provide daily mechanical support to forming operations and respond to machine downtime using safe, structured troubleshooting.

· Inspect, troubleshoot, repair, and maintain gears, shafts, bearings, bushings, chains, belts, couplings, clutches, brakes, cams, slides, gibs, linkages, feeders, straighteners, cutters, lubrication systems, guards, pneumatic components, and hydraulic components.

· Perform preventive and predictive maintenance, including lubrication, alignment checks, wear inspection, backlash and clearance checks, fastener verification, filter service, vibration observation, and replacement of worn components.

· Set up and mechanically adjust feed length, wire straightening, slides, cams, forming stations, transfer mechanisms, tooling clearances, pressure settings, and machine timing within approved standards.

· Troubleshoot part defects related to feed variation, cut length, bend angle, form location, pitch, twist, burrs, surface damage, tooling wear, timing, material handling, and mechanical repeatability.

· Remove, install, inspect, fit, align, and support repair of forming tools, dies, cams, slides, guides, feed rolls, grippers, cutters, arbors, mandrels, bearings, bushings, and related machine components.

· Use mechanical drawings, machine assembly prints, tooling drawings, cam layouts, lubrication charts, pneumatic and hydraulic diagrams, setup sheets, and OEM manuals to diagnose and restore equipment.

· Use calipers, micrometers, indicators, height gages, pin gages, feeler gages, angle measurement, straightedges, torque tools, and alignment tools to verify machine and tooling condition.

· Perform precision mechanical work including bearing and bushing replacement, shaft and coupling alignment, gib adjustment, chain and belt tensioning, gear mesh checks, timing verification, and controlled fitting of components.

· Use HMI alarms, indicator status, sensors, and interlocks only as supporting information for mechanical troubleshooting. Escalate electrical, PLC, drive, and program-related repairs to qualified controls or electrical personnel.

· Support equipment installation, relocation, leveling, alignment, commissioning, run-at-rate activities, capability improvement, and acceptance of new or rebuilt equipment.

· Complete work orders, PM records, downtime notes, measurements, parts usage, shift handoff, and repair history accurately.

· Participate in root-cause analysis, corrective actions, spare-parts planning, and PM improvement for repeated mechanical failures.

· Follow lockout/tagout, machine guarding, lifting and rigging, stored-energy control, housekeeping, environmental, and plant safety requirements.

· Coordinate repairs with Production, Tooling, Quality, Engineering, and service providers to protect part quality and minimize downtime.

· Train operators and less-experienced technicians on lubrication points, inspection checks, basic mechanical fault recognition, and standard recovery methods.

· Perform other duties as assigned.

  • Perform other duties as assigned.

Qualifications

Required Education & Experience

· High school diploma or equivalent.

· Formal industrial maintenance, machine repair, millwright, tool-and-die, machining, or related mechanical technical training; Journeyman status is preferred.

· Five or more years of industrial mechanical maintenance or forming-equipment experience, or an equivalent combination of education and experience.

· Demonstrated experience troubleshooting mechanical, pneumatic, hydraulic, lubrication, tooling, feeding, timing, and motion-related systems in a production environment.

· Experience with four-slide, multi-slide, CNC wire-bending, spring/wire-forming, stamping, or comparable cam-driven forming equipment is strongly preferred.

· Ability to work assigned shift, overtime, weekends, and emergency call-in coverage as required.

Mechanical Competencies

· Advanced mechanical fault isolation, including wear, looseness, misalignment, backlash, binding, vibration, timing variation, and lubrication-related failures.

· Working knowledge of machine timing, cam and slide motion, wire feeding and straightening, forming sequence, tooling alignment, and wear-related variation.

· Ability to inspect and repair dies, forming tools, cams, slides, gibs, guides, grippers, cutters, feed rolls, straighteners, bushings, bearings, and related wear components.

· Working knowledge of mechanical power transmission, precision alignment, fasteners, fits and tolerances, lubrication, component removal, and safe installation practices.

· Ability to read mechanical drawings, assembly prints, tooling drawings, cam layouts, lubrication charts, pneumatic diagrams, hydraulic diagrams, and OEM technical documentation.

· Proficiency with precision measurement and inspection tools required to verify setup, alignment, clearances, and machine condition.

· Basic awareness of sensors, solenoids, motors, drives, safety devices, and electrical prints for fault identification and proper escalation.

· Working knowledge of OSHA, ANSI, lockout/tagout, machine guarding, lifting and rigging, stored-energy control, and company safety requirements. Electrical work must remain within the employee’s training and authorization.

· Computer, math, documentation, and communication skills sufficient for maintenance records, measurements, parts requests, and cross-functional coordination.

Supervisory Responsibility

This position has no direct supervisory responsibilities. The technician may provide mechanical technical direction, training, and task coordination during troubleshooting, repairs, and equipment recovery activities.

Work Environment

Work is performed primarily on the manufacturing floor around operating machinery, moving equipment, noise, oils and lubricants, metal components, and varying temperatures. Required personal protective equipment and all plant safety controls must be used.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee is regularly required to use hands and fingers to handle, feel, or operate objects, tools or controls, and reach with hands and arms. The employee is frequently required to walk, stand, kneel, crouch, talk and hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and depth perception.

From $25, paid onceGet the CV for this job

What happens when you press

One press. We do the rest.

  1. A CV for this posting

    Written against CAMACO LLC's own wording, from every piece of relevant proof in your profile.

  2. 25 readers review it

    Recruiter, hiring manager, skeptic and more read every draft, round after round. You get the best round.

    The review screen in CV Rocket: how each CV was read, round by round.

  3. We apply on CAMACO LLC's form

    Our application engine gets through the hardest forms there are. Where a question needs you, AI suggests the best answer. Don't want us applying from our IP addresses? Use our Chrome extension: we apply straight from your own browser.

    An application in CV Rocket: every answer filled in on the employer's form.

  4. Every reply, sorted

    CAMACO LLC's answer lands in your private mailbox, and we classify it on arrival: interview, question, rejection.

    The CV Rocket inbox: each employer reply classified as an interview, an action or a rejection.

  5. Reply with AI

    AI helps you write the email, checks it and sends it. We show you whether the recruiter read it.

  6. The interview in your calendar

    Full integration with your calendar. The invitation goes straight in.

    An interview invitation in the CV Rocket inbox, added to the candidate's calendar.
Get the CV for this job

From $25 per CV, paid once. No subscription.

Why it works

3×

more interviews than doing it yourself with ChatGPT.

ChatGPT writes a CV and never learns what happened to it. We see every reply. For each CV we know:

  • How it was written, and how the review scored it
  • When we applied, and how long after the posting went up
  • Which posting, which company, which city
  • Who got the interview, and who heard nothing

That is how we know which CVs get called.

Get the CV for this job

From $25 per CV, paid once. No subscription.

The numbers game

More applications. More interviews.

Every application goes out with its own CV, written for that posting and paid once. Send enough of them and the law of large numbers finds you the job.

Get the CV for this job
By hand5–10
With CV Rocket100
applications a day

Nearby

Live postings like this one

Same employer first, then the same role elsewhere.

Before you press

Straight answers

Get the CV for this job

From $25 per CV, paid once. No subscription.

What if my background isn't good enough?

We make the most of the background you have. The CV uses every piece of relevant proof your profile holds, and one of the 25 readers reads your whole profile and flags what the CV left out.

Do you really apply for me?

Yes, on the employer's own form, the hardest ones included. Where a question needs you, you answer it right there and AI suggests the best answer. Don't want us applying from our IP addresses? Use our Chrome extension: we apply straight from your own browser.

Is it a subscription?

No. You pay once per CV, from $25. Every application goes out with its own CV, written for that posting.

One job. One CV.
Paid once.

Pick the posting you want. We write for it, apply for you and catch the reply.

Get the CV for this job

From $25 per CV, paid once. No subscription.